Apr. 27th, 2020

PSOD and VMFS corruption can occur when using HPE Rebranded Qlogic QLE269x series HBAs on HPE/Hitachi Servers (76353)
Symptoms
When using HPE rebranded Qlogic QLE269x HBAs, ESXi host fails with PSOD as well as potentially VMFS corruption. This applies to the HPE rebranded HBAs SN1100Q & SN1600Q

The most common indicator of an issue with the QLE269x chipset is the following message in /var/log/vmkernel.log, usually repeated numerous times leading up to the PSOD:
WARNING: qlnativefc: vmhba2(12:0.0): Invalid ISP SCSI completion handle(281) req=1
WARNING: qlnativefc: vmhba2(12:0.0): Invalid ISP SCSI completion handle(282) req=1
WARNING: qlnativefc: vmhba2(12:0.0): Invalid ISP SCSI completion handle(284) req=1

Below are additional qlnativefc driver messages that have been observed around the time of the PSOD:
qlnativefc: vmhba3(12:0.1): Inside qlnativefcAbortIsp
qlnativefc: vmhba3(12:0.1): Performing ISP error recovery - ha= 0x4308e6398b50.
qlnativefc: vmhba2(12:0.0): Inconsistent NVRAM detected: checksum=0x8c54d9ed id=^@ version=0x0.
qlnativefc: vmhba2(12:0.0): Falling back to functioning (yet invalid -- WWPN) defaults.
qlnativefc: vmhba2(12:0.0): 83XX: F/W Error Reported: Check if reset required.
qlnativefc: vmhba2(12:0.0): Heartbeat Failure encountered, chip reset required.
https://kb.vmware.com/s/article/76353

уже было - https://robopet3.dreamwidth.org/8890.html, но обновилось.
VMware ESXi 7.0.0 build-15843807: -flat.vmdk files are read locked when a snapshot is taken
https://communities.vmware.com/thread/632492
Добавление к заметке
Socat - COM and ТСР ports mapping
https://robopet3.dreamwidth.org/34373.html

еще Tibbo Device Server Toolkit (TDST)
TDST для Windows включает в себя драйвер виртуального COM-порта (VSPD) и набор утилит для удобного управления устройствами Tibbo.

Драйвер позволяет получить доступ к последовательным портам сервера устройств так, как если бы они были реальными COM-портами на вашем ПК. Программы для работы с последовательным портом даже не заметят подмены.

Connection Wizard помогает установить соединение трёх типов:

виртуальный COM-порт - сервер устройств;
прямой TCP или UDP - сервер устройств;
сервер устройств - сервер устройств.
Эта утилита упрощает выполнение сложных задач, таких как создание виртуального COM-порта для соединения с сервером устройств.

The Wizard assists you in creating three types of connections:

Virtual COM to Device Server
Direct TCP or UDP to Device Server
Device Server to Device Server

https://tibbo.com/ru/soi/software.html
https://tibbo.com/soi/software.html
tl;dr - If you are going to use ESXCLI to upgrade your standalone ESXi host, please make sure to use the correct command or you will have issues. Below are the two commands you will need to determine which ESXi Image Profiles are available given an offline bundle and then updating to a specific image profile.
https://www.virtuallyghetto.com/2020/04/important-nvme-ssd-not-found-after-upgrading-to-esxi-7-0.html

Profile

robopet3

May 2023

S M T W T F S
 12 3456
78910111213
14151617181920
21222324252627
28293031   

Most Popular Tags

Style Credit

Expand Cut Tags

No cut tags
Page generated Dec. 4th, 2025 09:02 am
Powered by Dreamwidth Studios